How to Set Up Bitmain Antminer S19 Series on Braiins Pool – Step-by-step Guide

how-to-set-up-bitmain-antminer-s19-series-on-braiins-pool

Using the Bitmain Antminer S19 series on the Braiin pool, we’ll step-by-step demonstrate how to mine bitcoin in this article.

Braiins Pool is the oldest bitcoin mining pool and to this day continues to be one of the leading mining pools in the world. Looking to mine Bitcoin on a Braiin pool with your Bitmain Antminer S19 series? Keep reading this step-by-step guide.

About Braiins Pool

The 2018-founded company Braiins is based in the Czech Republic and provides a variety of mining and cryptocurrency-related products, such as Braiins OS, BraiinsPool, Braiins Farm, and more.

It claims to increase your Bitcoin Asics mining efficiency up to 25% and with SlushPool (now BraiinsPool) you get a free mining pool because of their 0% for Braiins users.

It is either T17 or supports all popular Bitcoin miner models from S17 to S9. Braiins OS+ also lets you configure & manage your device remotely on the internet.

it is easy and simple to use If your ASICs have Bitmain firmware, it will be Braiins OS or Braiins OS+.

You can play with code and use it however you like with the help of the open-source operating system called Braiins.

How to Setup Bitmain Antminer S19 Series on Braiins Pool

How to Setup Bitmain Antminer S19 Series on Braiins Pool
Figure out how to connect the Bitmain Antminer S19 series miner to Braiins Pool by following these steps:
Sign-up for a Braiins Pool Account

In the event that you already have an account, you may use it. All cryptocurrencies that are supported can be mined using a single account.

  • Sign up to join the pool, then watch for the email of confirmation.
  • Activate your account.
Set Up the Bitmain Antminer S19 Series

To set up the server

The only operating system that can open the IPReporter.zip file is Microsoft Windows.

  1. Run the software after downloading IPReporter.zip from this page.
  2. By default, IP addresses are distributed using the industry-standard DHCP network protocol, so extract the file.
  3. Right-click”IPReporter.exe” and run it as Administrator.
  4. Select one of the following options:
    • The appropriate symbols—shelf, step, and position—can be used to identify farm servers.
    • Standard; suitable for personal servers.
  5. Click “Start“.
  6. Click the IP Report button on the controller board. Hold it down until it beeps, or for about five seconds.
    An IP address window will appear on your computer’s screen.
  7. Input your web browser with the provided IP address.
  8. Continue by entering the root’s username and password.
  9. In the Protocol section, it is optional to provide a static IP address.
  10. It is necessary to enter the IP address, DNS server, gateway, and subnet mask.
  11. Click “Save“.
  12. To learn more about DNS servers and gateways, click here.
Configure the Bitmain Antminer S19 Series

One of the pool servers listed below must be connected to your Bitmain Antminer S19 series miner. Never forget to set up your account’s user credentials. The login credentials needed for your miner look like this (please change userName and workerName according to your account information):

URL: stratum+tcp://stratum.braiins.com:3333
userID: userName.workerName
password: anything

Generic

workerName is optional—it is fine if you do not provide any. The system will automatically create an auto worker for you in this situation. For effective monitoring, we advise attaching a different workerName to each mining device.

There are servers for Braiins Pool spread out all over the world. Please use a location-specific URL rather than the default one for a better connection and lower latency.

Stratum V1 Endpoints (servers and Ports)

Prepare your hardware to begin mining on the Braiins Pool.

If you want to apply the 0% mining fee on Braiins Pool and you’re using a BOS+ version older than 22.08.1, enter the old slushpool.com addresses (in red). Old addresses will work indefinitely. Other than that, create new braiins.com addresses.

Servers LocationURL
Generalstratum+tcp://stratum.braiins.com:3333 stratum+tcp://stratum.slushpool.com:3333
Europestratum+tcp://eu.stratum.braiins.com:3333 stratum+tcp://eu.stratum.slushpool.com:3333
USA, East Coaststratum+tcp://us-east.stratum.braiins.com:3333 stratum+tcp://us-east.stratum.slushpool.com:3333
Brazil, South Americastratum+tcp://br.stratum.braiins.com:3333 stratum+tcp://br.stratum.slushpool.com:3333
Canadastratum+tcp://ca.stratum.braiins.com:3333 stratum+tcp://ca.stratum.slushpool.com:3333
Singapore, South Asiastratum+tcp://sg.stratum.braiins.com:3333 stratum+tcp://sg.stratum.slushpool.com:3333
Japan, Pacificstratum+tcp://jp.stratum.braiins.com:3333 stratum+tcp://jp.stratum.slushpool.com:3333
Russia, Moscowstratum+tcp://ru-west.stratum.braiins.com:3333 stratum+tcp://ru-west.stratum.slushpool.com:3333
Kazakhstanstratum+tcp://kz.stratum.braiins.com:3333 stratum+tcp://kz.stratum.slushpool.com:3333

Stratum V2 Endpoints (servers and Ports)

You need to run the Braiins OS+ firmware which supports Stratum V2 (stock manufacturing firmware currently does not support this new protocol).

If your BOS+ version is older than 22.08.1, you must enter the old slushpool.com addresses (in red) in order to apply the 0% mining fee on Braiins Pool. Old addresses will work indefinitely. Otherwise, create new braiins.com addresses.

Servers LocationURL
Generalstratum2+tcp://v2.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt
Europestratum2+tcp://v2.eu.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.eu.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt
USA East Coaststratum2+tcp://v2.us-east.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.us-east.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt
Brazil South Americastratum2+tcp://v2.br.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.br.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt
Russia Moscowstratum2+tcp://v2.ru-west.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.ru-west.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt
Kazakhstanstratum2+tcp://v2.kz.stratum.braiins.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt stratum2+tcp://v2.kz.stratum.slushpool.com/u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt

Example Configuration

Consider a miner named bigMiner and his worker, strongDevice. Furthermore, the Bitmain Antminer S19 series miner chose consciously to connect to European servers. The configuration information for this miner would look like the following (configure accordingly):

URL: stratum+tcp://eu.stratum.braiins.com:3333
userID: bigMiner.strongDevice
password: anything123

Generic

Register Your Payout Address

To collect your reward you have to set up a payout address in the Settings > selected coin > Payouts menu. Your rewards will be sent there once you reach the minimal requirement. Although you are not required to register this address in order to begin mining, doing so is highly advised.

Get a wallet first if you don’t already have one.

Alternatively, if you choose to purchase Bitcoin rather than mine it, we advise you to do some research first.

Check If You Are Mining

To check if your Bitmain Antminer S19 series miner is mining, open your Dashboard on the Mining tab for the coin that you are mining. Then check your hash rate in the Recent Hash Rate graph section. Then check your hash rate in the Recent Hash Rate graph section below. Please be patient; it may take up to an hour before you see your newly connected device’s full hashing power.

Braiins is Trusted Or Not?

A highly regarded cryptocurrency business with a variety of services is Braiins. The long-term miners are much more knowledgeable about Braiins.

It has been on the market for more than ten years, and there are no overtly negative reviews in their BitcoinTalk thread.

Summary

You can now try to connect your Bitmain Antminer S19 series miner to Braiins Pool to begin mining Bitcoin after reading the tutorial’s detailed instructions above.

FAQs

How Do I Set Up Braiins OS?

Install Braiins OS using Web package

  1. Visit our website and download the Web Package.
  2. Upon logging in, navigate to System -> Upgrade on your miner.
  3. Upload the downloaded package and flash the image

Why is My Antminer S19 Seires Miner Not Connecting to Pool?

All miners cannot connect to the same mining pool port. That’s because the mining pool port is disabled. Please check whether it is disabled by yourself or the network itself. In the latter scenario, your only option is to stop using the mining pool port and switch to another pool port.

Why is My Antminer S19 Seires Miner Not Mining?

The Antminer test the fans and the fan speeds and if it’s too low – the miner will not start mining at all. I advise looking for fan speed errors in the Kernel Log. Just purchase an Antminer Replacement Fan if you see them. Not all fans are created equal, so make sure to purchase ours for the right specifications and fan speeds.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top