Operation & Maintenance

This guide will introduce how to set set the static IP Address on the Antminer S19 ASICs and how to batch configure static IP to better manage your Antminer S19s.

This article will cover both the essential facts you should be aware of and whether you can operate a Bitmain Antminer S19 series miner at home.

Here are some general steps you can follow to use these settings. Antminer S19 Series Firmware Low Power Mode

At the appropriate temperature, the Bitmain Antminer S19 series will unquestionably operate normally. This post details the typical operating temperature range for the Bitmain Antminer S19 series and other Antminer models.

Learn the essential dos and don’ts of using your new Bitmain Antminer S19 Series miner. Protect your investment and ensure optimal performance.

You can use this tutorial to learn how to set up the V1.0 test jig manual for Bitmain Antmier S19 series miners to identify faulty dashboards in your miner.

1. There are two parallel trapezoidal sockets on each Bitmain Antminer S19 series power plug. It is advised to use two power cords with a combined current of at least 10A. 2. When turning on the machine, plug in the two power cords first and then turn on both power cords simultaneously through the socket …

Power-on and Power-off Guidance for Bitmain Antminer S19 Series PSU Read More »

Use a dependable mining profitability calculator to calculate Bitmain Antminer S19 Series earnings and ROI, like those offered by BTC.com or Antpool.

There are three ways to reset to factory settings.

This method applies to all ANTMINER S19 Series. To Power Off/shut Down a Miner: Since the power supply powers the mining machine directly and there is no switch, you can either unplug the power supply’s 220V input line to turn it off completely or turn it off directly on the vac.Note*: The APW12 power supply …

How to Power Off, Reboot, Or Restart The Bitmain Antminer S19 Series? Read More »