This method applies to all ANTMINER S19 Series.
To Power Off/shut Down a Miner:
Since the power supply powers the mining machine directly and there is no switch, you can either unplug the power supply’s 220V input line to turn it off completely or turn it off directly on the vac.
Note*: The APW12 power supply has two power lines. If you can’t turn both power lines on or off at once, you should plug in the outer power line first before plugging in the inner power supply when you turn the machine on. When the machine is turned off, turn off the power lines against the inside first, followed by the lines against the outside.
To Restart/reboot a Miner:
There are two ways to restart the miner;
first is to power off the miner and then power on again.
second is to backend restart
- Series 17:click “Reboot” in the miner user interface as below.
Miner backstage > System > Reboot
- New firmware versions such as Antminer 19 series：in the bottom right corner of the background screen, click on “Restore factory settings”.
Please get in touch with us if you have any questions so we can help.
