For Antminer S19 (Metal Core PCB) / L7
Function: Antminer S19/L7 Air-cooling Miner
Bitmain Antminer APW12 1417 a (version) PSU for Bitmain Antminer L7, the excellent APW12 14V 17V power supply can also for Antminer S19JL, Antminer S19L, Antminer D7, max output 1 14-17V 182A, mix output 2 12V 18A. If you are a mining farm manager, please keep some spare APW12 1417 power supplies for the miner rig and replace the damaged power supply in time can reduce losses.
Notice:
If the APW12 1417 power supply used by the miner is damaged, please do not use the APW12 power supply to replace it.
Please update your ANTMINER with the newest firmware accordingly after replacing the power supply.
Product Glance
Out1
| DC Voltage | 14V-17V |
| Rated Current(220V input) | 182A |
| Ripple & Noise | <1% |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <2S |
| Short Circuit Protection | >10mS |
Detailed Characteristics
Out2
| DC Voltage | 12.3V |
| Rated Current(220 V input) | 18A |
| Ripple & Noise | <1% |
| Voltage Accuracy | 12.2V—12.4V |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <2S |
| Short Circuit Protection | >10mS |
Input
| Voltage Range | 200-240V AC |
| Frequency Range | 47-63Hz |
| Power Factor | >0.99(full load) |
| Leakage Current | <1.5mA（220V 50Hz） |
Protection
| Low-voltage Input | 80-89V AC |
| Output Short Circuit | Yes |
| Overheat Protection | Yes |
| Over-current Output | 260A-340A （protection value varies under different voltage） |
Environment
| Operating Temperature | -20-45℃ |
| Operating Humidity | 20%-90%RH（non–condensing） |
| Altitude | < 2000m |
Structure
| Dimensions | 254.6mm*251.6mm*63mm |
| Net Weight | 3.6kg |
| Cooling System | Forced‐air cooling |
| Noise | 45dBA |
