For Antminer ASIC S19 – Antminer S19 Hyd./ T19 Hyd./ S19 Pro Hyd./ S19 Pro+ Hyd.
Function: Antminer S19 Hydro/T19 Hydro/S19 Pro Hydro/S19 Pro+ Hydro SHA256 Hydro-cooling Miner
Bitmain power supply APW11 17V-21.6V EMC PSU is suitable for Antminer S19 Hydro / T19 Hydro / S19 Pro Hydro / S19 Pro+ Hydro SHA256 water-cooled miner rig.
Before purchasing APW11 PSU, please contact sales to confirm the same power supply as your miner version.
Input: AC 380-450V, 3-phase+PE, 50-60Hz, 12A Max.
OUTPUT1: 17-21.6V
OUTPUT2: 12V
Please update your ANTMINER with the newest firmware accordingly after replacing the power supply.
Product Glance
Out1
| DC Voltage | 17V-21.6V |
| Rated Current(380V input) | 300A |
| Rated Power(380Vinput) | 6500W |
| Ripple & Noise | <1% |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <5S |
| Short Circuit Protection | >10mS |
Detailed Characteristics
Out2
| DC Voltage | 12.3V |
| Rated Current(220 V input) | 1A |
| Ripple & Noise | <1% |
| Voltage Accuracy | 12.2V—12.4V |
| Line Regulation | <1% |
| Load Regulation | <1% |
| Setup Time | <5S |
| Short Circuit Protection | >10mS |
Input
| Voltage Range | 380-415V AC |
| Frequency Range | 50~60 Hz |
| Power Factor | >0.99(full load) |
| Leakage Current | <1.5mA（380V 50Hz） |
Protection
| Low-voltage Input | < 304V AC |
| Output Short Circuit | Yes |
| Overheat Protection | Yes |
| Over-current Output | 300A-350A |
Environment
| Operating Temperature | -20-45℃ |
| Operating Humidity | 20%-90%RH（non–condensing） |
| Altitude | < 2000m |
Structure
| Dimensions | 320mm*179mm*63mm |
| Net Weight | 5kg |
| Cooling System | Water cooling |
| Inlet temperature | 20-35 ℃ |
| Water flow rate | 8L/min |
| Water pressure | <3.5 BAR |
BuyAntminerS19.com is committed to providing technical support and miner business for miner enthusiasts around the world, providing efficient and accurate Bitmain Antminer S19 Series ASIC miners maintenance guidance, miner repair and miners sales
