ASICDIP AntMiner S19j Pro Firmware

Here are the newest ASICDIP AntMiner S19j Pro Firmware for S19 ASIC and the firmware installation guide.

Get more Antminer S19 series Firmware.

ASICDIP AntMiner S19j Pro Firmware 1.1.12

ATTENTION: Firmware is working only with Antminers S19j Pro.

Release: 1.1.12

Date: 07.02.2023

Size of the firmware14.5 Mb

Size of SD image14.6 Mb

Hash Sum of the firmware: cd69f2bed381a20c20f77a320bc84857

Hash Sum of SD image: 7b7474fc982debdf14df455270dc399c

What’s new

New:
1. Support for Bitmain Antminer S19 Series: Antminer S19 (88), Antminer S19j Pro A, Antminer S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. ability to control startup voltage (Useful for those running close to max of breakers or Power Distribution Unit);
6. The widgets are now responsive! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. ability for large customers to remotely install firmware on AML and BB control boards. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);

Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);

Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;

Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19

Installation

– Use a FAT 32, 16 GB SD card to install the firmware.
– Download the SD file for your specific S19jPro control board version, unzip it, then move all of the files to the SD card. Your control board version can be found on the white label on the cover of the control board.
– When you turn on the asic and insert the SD card containing the ASICDIP firmware, the BITMAIN firmware will revert if you remove the SD card.
– Download the firmware WEB file and use the upgrade function in the firmware if you need to update the ASICDIP firmware on the SD card that you are currently using.
– The bitmain power supply must be upgraded (check the manual for instructions) if the consumption during overclocking is greater than 4600 watts.
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What do control boards do. the power supply soldering technique.

ASICDIP AntMiner S19j Firmware

Modes

POPULAR MODES:
S19jpro 125 TH/s – 3800 watt (30 watt – TH/s)
S19jpro 140 TH/s – 4600 watt (33 watt – TH/s)
S19jpro 170 TH/s – 6200 watt (36 watt – TH/s)

STOCK BITMAIN FIRMWARE:
S19jpro 110 TH/s – 3300 watt (30 watt – TH/s)

Old Versions of ASICDIP AntMiner S19j Pro Firmware

ASICDIP AntMiner S19j Pro Firmware 1.1.11

Release: 1.1.11

Date: 19.08.2022

Size of the firmware: 16.6 Mb

Size of SD image: 16.7 Mb

Hash Sum of the firmware: ce7fc9077c3cfd778d68c0e91ffdfad3

Hash Sum of SD image: 48b2b98cf1f569bc50ab23eed4a25d6c

What’s new:

1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A

ASICDIP AntMiner S19j Pro Firmware 1.1.9

Release: 1.1.9

Date: 01.06.2022

Size of the firmware: 15.8 Mb

Size of SD image: 15.9 Mb

Hash Sum of the firmware: fd27a7e762c292f7efc7a138367ffad4

Hash Sum of SD image: c6f527bce8761613efd87524f46bb0ae

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19jpro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer available from the local network are API commands.

ASICDIP AntMiner S19j Pro Firmware 1.1.7

Release: 1.1.7

Date: 18.02.2022

Size of the firmware: 16.1 Mb

Size of SD image: 16.1 Mb

Hash Sum of the firmware: a0db3e994417609ed9adc555ad523c36

Hash Sum of SD image: 23a0c9f91dd665c2b3a4f2892eed2442

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer There are local network API commands available.

ASICDIP AntMiner S19j Pro Firmware 1.1.3

Release: 1.1.3

Downloaded: 209

Date: 16.02.2022

Size of the firmware: 16.1 Mb

Size of SD image: 16.1 Mb

Hash Sum of the firmware: 44ea99cf1c585364211a34f41bfee8c5

Hash Sum of SD image: a7fa7e266b88e18cf620b33f02497900

1) Generally speaking, the main drivers have been revised, optimized, and improved.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top