Here are the newest ASICDIP AntMiner S19j Pro Beagle Bone Firmware for S19 ASIC and the firmware installation guide.
Table of Contents
Get more Antminer S19 series Firmware.
ASICDIP AntMiner S19j Pro Beagle Bone Firmware 1.1.12
ATTENTION: Firmware is working only with Antminers S19j Pro Beagle Bone.
Release: 1.1.12
Date: 07.02.2023
Size of the firmware: 13.4 Mb
Size of SD image: 13.5 Mb
Hash Sum of the firmware: 1e0becf88f0e51041f4ed9e9618fb9aa
Hash Sum of SD image: c3717565e3fdfc38e9cdd3042cabebc1
What’s new
New:
1. Support for Bitmain Antminer S19 Series: Antminer S19 (88), Antminer S19j Pro A, Antminer S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. being able to control the startup voltage (Useful for those running close to max of breakers or Power Distribution Unit);
6. These days, widgets are responsive. 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. For large clients, the ability to remotely install firmware on AML and BB control boards. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Installation
– Use an SD card that is no larger than 16 GB and formatted in FAT 32 to install the firmware.
– Download the SD file for your S19jPro Beagle Bone control board (you can find your version on the white label of the control board cover), unzip it, and then move all of the files to the SD card.
– When you turn on the asic and insert the SD card containing the ASICDIP firmware, the BITMAIN firmware will revert if you remove the SD card.
– Download the firmware WEB file and use the upgrade function in the firmware if you need to update the ASICDIP firmware that is currently installed on the SD card.
– It will be necessary to upgrade the bitmain power supply (check the manual for instructions) if the consumption during overclocking is higher than 4600 watts.
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What do control boards do. about how to solder the power supply.
Modes
POPULAR MODES:
S19jpro-bb 125 TH/s – 3800 watt (30 watt – TH/s)
S19jpro-bb 140 TH/s – 4600 watt (33 watt – TH/s)
S19jpro-bb 170 TH/s – 6200 watt (36 watt – TH/s)
STOCK BITMAIN FIRMWARE:
S19jpro-bb 110 TH/s – 3300 watt (30 watt – TH/s)
Old Versions of ASICDIP AntMiner S19j Pro Beagle Bone Firmware
ASICDIP AntMiner S19j Pro Beagle Bone Firmware 1.1.11
Release: 1.1.11
Date: 19.08.2022
Size of the firmware: 16.0 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: f7b04ab37df399ec4e4797eff3933f8d
Hash Sum of SD image: 4c4b7dc21baa0d02d706d7de44f237f2
What’s new:
1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
ASICDIP AntMiner S19j Pro Beagle Bone Firmware 1.1.9
Release: 1.1.9
Date: 01.06.2022
Size of the firmware: 15.2 Mb
Size of SD image: 15.3 Mb
Hash Sum of the firmware: fd27a7e762c292f7efc7a138367ffad4
Hash Sum of SD image: c6f527bce8761613efd87524f46bb0ae
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19jpro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer available from the local network are API commands.
ASICDIP AntMiner S19j Pro Beagle Bone Firmware 1.1.7
Release: 1.1.7
Date: 18.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: a0db3e994417609ed9adc555ad523c36
Hash Sum of SD image: 23a0c9f91dd665c2b3a4f2892eed2442
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer There are local network API commands available.
ASICDIP AntMiner S19j Pro Beagle Bone Firmware 1.1.3
Release: 1.1.3
Downloaded: 209
Date: 16.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: 44ea99cf1c585364211a34f41bfee8c5
Hash Sum of SD image: a7fa7e266b88e18cf620b33f02497900
1) Generally speaking, the main drivers have been revised, optimized, and improved.