ASICDIP AntMiner S19j Firmware

Here are the newest ASICDIP AntMiner S19j Firmware and the firmware installation guide.

Get more Antminer S19 series Firmware.

ASICDIP AntMiner S19j Firmware 1.1.12

ATTENTION: Firmware is working only with Antminers S19j.

Release: 1.1.12

Date: 07.02.2023

Size of the firmware14.5 Mb

Size of SD image14.6 Mb

Hash Sum of the firmwarebba8728003568e02eb746ef663d1919e

Hash Sum of SD image8f1c213abca97c638a0cc4d860aa8bbd

What’s new

New:
1. Support for Antminer S19 series: Antminer S19 (88), Antminer S19j Pro A, Antminer S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);

Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);

Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;

Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19

Installation

– Utilize a FAT 32, 16 GB SD card to install the firmware.
– Download the SD file for the S19j control board that corresponds to your version, unzip it, and then move all of the files to the SD card.
– When you turn on the asic and insert the SD card containing the ASICDIP firmware, the BITMAIN firmware will revert if you remove the SD card.
– Download the firmware WEB file and use the firmware’s upgrade function to update the ASICDIP firmware on the SD card that is currently in use.
– It will be necessary to upgrade the bitmain power supply (check the manual for instructions) if the consumption during overclocking is higher than 4600 watts.
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What do control boards do. the power supply soldering technique.

ASICDIP AntMiner S19j Firmware

Modes

POPULAR MODES:
S19 115 TH/s – 3850 watt (33 watt – TH/s)
S19 125 TH/s – 4600 watt (37 watt – TH/s)
S19 140 TH/s – 6100 watt (43 watt – TH/s)
STOCK BITMAIN FIRMWARE:
S19 90 TH/s – 3100 watt (34 watt – TH/s)

Old Versions of ASICDIP AntMiner S19j Firmware

ASICDIP AntMiner S19j Firmware 1.1.11

Release: 1.1.11

Date: 18.08.2022

Size of the firmware: 16.6 Mb

Size of SD image: 16.7 Mb

Hash Sum of the firmware: 108b69d0c909ef06a14b0b5f604f0735

Hash Sum of SD image: a6ffa8c238274ea54900d6dd0e239bfd

What’s new:

1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A

ASICDIP AntMiner S19j Firmware 1.1.9

Release: 1.1.9

Date: 01.06.2022

Size of the firmware: 15.9 Mb

Size of SD image: 15.9 Mb

Hash Sum of the firmware: 868395bd16747babb3ad00f55dc8334b

Hash Sum of SD image: 198d3800e61aef8e637932bc248d4a77

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer There are local network API commands available.

ASICDIP AntMiner S19j Firmware 1.1.7

Release: 1.1.7

Date: 18.02.2022

Size of the firmware: 16.1 Mb

Size of SD image: 16.1 Mb

Hash Sum of the firmware: a76cfb2126a1bf2b2e1abdd1cb326a28

Hash Sum of SD image: 362005182c0d05e7569579300d7fc356

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer Available from the local network are API commands.

ASICDIP AntMiner S19j Firmware 1.1.3

Release: 1.1.3

Date: 16.02.2022

Size of the firmware: 16.1 Mb

Size of SD image: 16.1 Mb
Hash Sum of the firmware: ab5a37f18596f43babf9516a0626d2f2

Hash Sum of SD image: d92790a3567164f78fda6944f6ee6e6f

1) Generally speaking, the main drivers have been revised, optimized, and improved.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top