ASICDIP AntMiner S19j Beagle Bone Firmware

Here are the newest ASICDIP AntMiner S19j Beagle Bone Firmware for S19 ASIC and the firmware installation guide.

Get more Antminer S19 series Firmware.

ASICDIP AntMiner S19j Beagle Bone Firmware 1.1.12

ATTENTION: Firmware is working only with Antminers S19j Beagle Bone.

Release: 1.1.12

Date: 07.02.2023

Size of the firmware13.4 Mb

Size of SD image13.4 Mb

Hash Sum of the firmware6eb28d4314c5279af8c3cde0239eb7b0

Hash Sum of SD image23b53e838d6e6729821999021ee321c9

What’s new

What’s new: New:

1. Support for Bitmain Antminer S19 seires: Antminer S19 (88), S19j Pro A, S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. the ability to adjust startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are now responsive! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. AML and BB control boards can have their firmware remotely installed for big clients. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);

Changed:

1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);

Bugs fixed:

1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;

Currently supported:

Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19

Installation

– Use a FAT 32, 16 GB SD card to install the firmware.
– Download the SD file for the S19j Beagle Bone control board that corresponds to your version (you can find your version on the white label on the control board cover), unzip it, and then move all of the files to the SD card.
– When you turn on the asic and insert the SD card containing the ASICDIP firmware, the BITMAIN firmware will revert if you remove the SD card.
– Download the firmware WEB file and use the firmware’s upgrade function to update the ASICDIP firmware on the SD card that is currently in use.
– It will be necessary to upgrade the bitmain power supply (check the manual for instructions) if the consumption during overclocking is higher than 4600 watts.
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What are control boards, exactly. how to solder the power supply

ASICDIP AntMiner S19j Firmware

Modes

POPULAR MODES:
S19j-bb 115 TH/s – 3850 watt (33 watt – TH/s)
S19j-bb 125 TH/s – 4600 watt (37 watt – TH/s)
S19j-bb 140 TH/s – 6100 watt (43 watt – TH/s)

STOCK BITMAIN FIRMWARE:
S19j-bb 90 TH/s – 3100 watt (34 watt – TH/s)

Old Versions of ASICDIP AntMiner S19j Beagle Bone Firmware

ASICDIP AntMiner S19j Beagle Bone Firmware 1.1.11

Release: 1.1.11

Date: 18.08.2022

Size of the firmware: 16.0 Mb

Size of SD image: 16.1 Mb

Hash Sum of the firmware: 77e293d861ebe0eb7ce7410ab94ce78c

Hash Sum of SD image: d9567871938859852d7acac0f5bea4ff

What’s new:

1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A

ASICDIP AntMiner S19j Beagle Bone Firmware 1.1.9

Release: 1.1.9

Date: 01.06.2022

Size of the firmware: 15.2 Mb

Size of SD image: 15.3 Mb

Hash Sum of the firmware: 940a7b137411bdf09872bb98081a7941

Hash Sum of SD image: 3b2b9662153a062cd6ee5c68e714d5e9

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer Available from the local network are API commands.

ASICDIP AntMiner S19j Beagle Bone Firmware 1.1.7

Release: 1.1.7

Date: 18.02.2022

Size of the firmware: 15.4 Mb

Size of SD image: 15.5 Mb

Hash Sum of the firmware: 71d89e1c44b608e44e219408503fb639

Hash Sum of SD image: 63740b63ba37ae4b0926133ad9287ac6

What’s new:

1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer available from the local network are API commands.

ASICDIP AntMiner S19j Beagle Bone Firmware 1.1.3

Release: 1.1.3

Downloaded: 209

Date: 16.02.2022

Size of the firmware: 15.4 Mb

Size of SD image: 15.7 Mb

Hash Sum of the firmware: 391110bb239acde34b5379641a363a8a

Hash Sum of SD image: d18af6a3027393e241890f083cc99bb3

1) general stability, main driver revision, and optimization.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top