Here are the newest ASICDIP AntMiner S19 Pro Firmware and the firmware installation guide.
Table of Contents
Get more Antminer S19 series Firmware.
ASICDIP AntMiner S19 Pro Firmware 1.1.12
ATTENTION: Firmware is working only with Antminers S19 Pro.
Release: 1.1.12
Date: 07.02.2023
Size of the firmware: 14.5 Mb
Size of SD image: 14.6 Mb
Hash Sum of the firmware: 6dc130eca829d9055611ab0aa5ec23af
Hash Sum of SD image: 7c1589f5390b80eeed99783228f7e5bf
What’s new
New:
1. Support for Bitmain Antminer S19 sereis: Antminer S19 (88), Antminer S19j Pro A, Antminer S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. being able to control the startup voltage (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are now responsive! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. AML and BB control boards can have their firmware remotely installed for big clients. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Installation
– Use a FAT 32, 16 GB SD card to install the firmware.
– Download the SD file for the S19Pro control board that corresponds to your version, unzip it, and then move all of the files to the SD card.
– When you turn on the asic with the SD card inserted with the ASICDIP firmware, BITMAIN firmware will revert if the SD card is removed.
– Download the firmware WEB file and use the upgrade function in the firmware if you need to update the ASICDIP firmware that is currently installed on the SD card.
– The bitmain power supply must be upgraded (check the manual for instructions) if the consumption during overclocking is greater than 4600 watts.
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What do control boards do. how to solder the power supply

Modes
POPULAR MODES:
S19pro 125 TH/s – 3800 watt (30 watt – TH/s)
S19pro 140 TH/s – 4600 watt (33 watt – TH/s)
S19pro 170 TH/s – 6200 watt (36 watt – TH/s)
STOCK BITMAIN FIRMWARE:
S19pro 110 TH/s – 3300 watt (30 watt – TH/s)
Old Versions of ASICDIP AntMiner S19 Pro Firmware
ASICDIP AntMiner S19 Pro Firmware 1.1.11
Release: 1.1.11
Date: 18.08.2022
Size of the firmware: 16.6 Mb
Size of SD image: 16.7 Mb
Hash Sum of the firmware: 1f677482542a53b0a976951f0c67625c
Hash Sum of SD image: 1cc3f89fe8ddfadb970fbf0c0c396932
What’s new:
1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
ASICDIP AntMiner S19 Pro Firmware 1.1.9
Release: 1.1.9
Date: 01.06.2022
Size of the firmware: 15.8 Mb
Size of SD image: 15.9 Mb
Hash Sum of the firmware: 25672012b820949f3bc378a3493cbf3f
Hash Sum of SD image: 2a54981e8c64145ee50c4c9289a28e48
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer Available from the local network are API commands.
ASICDIP AntMiner S19 Pro Firmware 1.1.7
Release: 1.1.7
Date: 18.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: bbabf02c0473fe27766238fe690c8873
Hash Sum of SD image: a2b43bcf68b195f7caebe1f63f15c3eb
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer There are local network API commands available
ASICDIP AntMiner S19 Pro Firmware 1.1.3 Update-2
Release: 1.1.3 update-2
Date: 17.02.2022
Size of the firmware: 16.1 Mb
Hash Sum of the firmware: e0c24a9d4e4292625a44466f9fdf2415
1) Generally speaking, the main drivers have been revised, optimized, and improved.
ASICDIP AntMiner S19 Pro Firmware 1.1.3
Release: 1.1.3
Downloaded: 209
Date: 16.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: c5abe8fa4acbced96ec065e736a492fd
Hash Sum of SD image: 89ebc46d80164446f62d54f5e41d068e
1) Generally speaking, the main drivers have been revised, optimized, and improved.