Here are the newest ASICDIP AntMiner S19 Firmware and the firmware installation guide.
Table of Contents
Get more Antminer S19 series Firmware.
ASICDIP AntMiner S19 Firmware 1.1.12
ATTENTION: Firmware is working only with Antminers S19.
Release: 1.1.12
Date: 07.02.2023
Size of the firmware: 14.5 Mb
Size of SD image: 14.6 Mb
Hash Sum of the firmware: 82ef85cefb53e2e7e838063fa58e2140
Hash Sum of SD image: 5ba638c6e1f58627a48c33f8d8e3ffaa
What’s new
New:
1. Support for Antminer S19 (88), Antminer S19j Pro A, Antminer S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. the ability to adjust startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. The widgets are now responsive! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. For large clients, the ability to remotely install firmware on AML and BB control boards. Xilinx – SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Installation
– Use a FAT 32, 16 GB SD card to install the firmware.
– For your specific version of the S19 control board, download the SD file, unzip it, and then move all of the files to the SD card. Your version can be found on the white label on the control board cover.
– When you turn on the asic and insert the SD card containing the ASICDIP firmware, the BITMAIN firmware will revert if the SD card is removed.
– Download the firmware WEB file and use the firmware’s upgrade function to update the ASICDIP firmware on the SD card that is currently in use.
– It will be necessary to upgrade the bitmain power supply if the consumption during overclocking is greater than 4600 watts (consult the manual for instructions).
ATTENTION: see supplement to instructions (Bitmain_APW_12_modifications_ru). What are control boards. about how to solder the power supply.

Modes
POPULAR MODES:
S19 115 TH/s – 3850 watt (33 watt – TH/s)
S19 125 TH/s – 4600 watt (37 watt – TH/s)
S19 140 TH/s – 6100 watt (43 watt – TH/s)
STOCK BITMAIN FIRMWARE:
S19 90 TH/s – 3100 watt (34 watt – TH/s)
Old Versions of ASICDIP AntMiner S19 Firmware
ASICDIP AntMiner S19 Firmware 1.1.11
Release: 1.1.11
Date: 18.08.2022
Size of the firmware: 16.6 Mb
Size of SD image: 16.7 Mb
Hash Sum of the firmware: 4bb6378c07de08b35e91510a3fe16c54
Hash Sum of SD image: 09e7a9f496b47d68148a8dd7893b236b
What’s new:
1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel “quick” settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
ASICDIP AntMiner S19 Firmware 1.1.9
Release: 1.1.9
Downloaded: 285
Date: 01.06.2022
Size of the firmware: 15.9 Mb
Size of SD image: 15.9 Mb
Hash Sum of the firmware: d36b7d57ca90ced2a3239cb5633020e7
Hash Sum of SD image: b04688cf91aaf2af328f55a09db58f72
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer There are local network API commands available.
ASICDIP AntMiner S19 Firmware 1.1.7
Release: 1.1.7
Downloaded: 309
Date: 18.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: 4e4ad6d6b78345bcdf3c3b3c84ad4355
Hash Sum of SD image: c247c7f86f416ded562456a683fcbc61
What’s new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer Available from the local network are API commands.
ASICDIP AntMiner S19 Firmware 1.1.3
Release: 1.1.3
Downloaded: 209
Date: 16.02.2022
Size of the firmware: 16.1 Mb
Size of SD image: 16.1 Mb
Hash Sum of the firmware: 10581297824af010a17ae39fc1981e33
Hash Sum of SD image: f0c8954f57fb4f0394d314f0cadfef0f
What’s new: 1) overall stability, driver revision, and general optimization.